LP7110AT — Single-Ended Beam Load Cells
IP68 stainless Single-Ended Beam Load Cells from 500 lb to 11,240 lb, C3 or C6 accuracy, 2.0 mV/V output.
Overview
The LP7110AT is a stainless steel Single-Ended Beam Load Cells sealed to IP68, for floor scales, pallet scales and weighing modules in wet or hygienic areas. Capacities are 500, 1,000, 2,500, 5,000 and 11,240 lb. Two accuracy classes are available: C3 at 2.0 ± 0.002 mV/V with temperature effect of ±0.02% F.S./10 F and total error of ±0.02% F.S., and C6 at the same output with temperature effect of ±0.01% F.S./10 F and total error of ±0.01% F.S. Corresponding creep is ±0.02% F.S. and ±0.01% F.S. over 30 minutes. Input resistance is 1,100 ±10 ohm and output 1,000 ±1 ohm. The cell runs from -22 F to 158 F, takes 150% F.S. safe and 300% F.S. destructive load, and works on 4-12 VDC recommended, 15 VDC maximum. A 4-core cable runs 10 ft for 1,000 to 5,000 lb and 19.7 ft for 11,220 lb.
Specifications
|
Specification |
Value |
|
Rated capacity |
500/1,000/2,500/5,000/11,240 lb |
|
Accuracy class |
C3; C6 available |
|
Rated output |
2.0 ±0.002 mV/V |
|
Temp effect on zero |
±0.02% F.S./10 F (C3); ±0.01% F.S./10 F (C6) |
|
Temp effect on sensitivity |
±0.02% F.S./10 F (C3); ±0.01% F.S./10 F (C6) |
|
Total error |
±0.02% F.S. (C3); ±0.01% F.S. (C6) |
|
Creep (30 min) |
±0.02% F.S. (C3); ±0.01% F.S. (C6) |
|
Input resistance |
1,100 ±10 ohm |
|
Output resistance |
1,000 ±1 ohm |
|
Operating temp range |
-22-158 F |
|
Insulation resistance |
≥5,000 Mohm |
|
Safe / destructive load |
150% / 300% F.S. |
|
Excitation |
4-12 VDC recommended, 15 VDC maximum |
|
Construction |
Stainless steel |
|
Protection |
IP68 |
|
Cable |
10 ft (1,000-5,000 lb); 19.7 ft (11,240 lb) |
Features
IP68 Stainless
A sealed stainless body keeps moisture out in washdown, food and outdoor installations.
C3 or C6
Two accuracy classes let one model serve trade weighing or high-resolution batching.
500-11,240 lb
Five capacities share one mounting pattern for floor and pallet scale frames.
Low Thermal Drift
Temperature effect of 0.01% F.S./10 F on C6 holds readings steady through plant temperature swings.
Applications
Downloads & Documentation
Need LP7110AT for your application?
Tell us your capacity, accuracy class, and environment — our engineers will confirm fit and check live inventory.